ReSpeaker Lite Enclosure
A custom‑designed case from Printables (by Leo) replaces the floating board on a drawer. A separate printed block slots inside to secure the speaker, keeping buttons accessible while giving the device a clean, professional look.
- Material: PLA (PETG recommended for extra strength)
- Print time: ~2 hours
- Key benefit: protects the board and tidies the desk.
Nintendo Switch 2 Travel Case
This slim, 3‑printed case from Makerworld (oruoff) costs around $3 in filament versus $20 for a commercial shell. It snaps together, holds the console and Joy‑Cons securely, and endures daily travel wear.
- Print cost: ~$3
- Features: removable lid, optional larger version with extra compartment
- Ideal for: frequent travelers who need lightweight protection.
MacBook Pro Cable Winder
A handy organizer that wraps around the charger brick, offering divots to adjust cable tension. It keeps the cable tidy without crushing it and stays attached to the brick for on‑the‑go use.
- Material: PLA (PETG for higher heat resistance)
- Print time: ~1 hour
- Benefit: reduces cable clutter and protects the cord.
LED Tealight Holder
A decorative three‑part print that houses a tealight LED. The top lifts easily for battery changes, and the intricate design adds ambience without taking up much desk space.
- Print time: ~4 hours (detailed geometry)
- Material: PLA
- Use case: décor, night‑lights, or gifting.
Wi‑Fi Devboard & Flipper Zero Combined Case
This functional case merges two popular devboards into a single protected enclosure. It uses 3D‑printed M3 screws for hinges and latches, and includes a snap‑on dock for the Wi‑Fi board.
- Material: PLA (consider PETG for added durability)
- Print time: ~2.5 hours
- Key feature: keeps both devices together and safe.
Google Pixel Watch 2 Charger Stand
A tilted holder that keeps the watch charger upright on a desk, preventing drops and keeping the time visible while charging.
- Material: PLA (reinforce with higher infill if traveling)
- Print time: ~1.5 hours
- Tip: glue any cracks for long‑term use.
Modular Storage Solutions
From stackable drawers to SD‑card holders and basket‑style containers, these prints let you build a customized organization system using minimal filament.
- Materials: PLA or PETG depending on load
- Print time: varies per module (30 min‑2 hours)
- Advantages: cheap, customizable, and expandable.
Additional Handy Prints
Other popular accessories include DS cartridge holders, a flattened case for the SteelSeries Arctis Nova Pro Wireless receiver, and a GoXLR Mini mount. All are readily searchable on Printables or Yeggi.
- Search terms: "storage basket 3d print", "sd card holder printable", "gaming accessory case"
- Result: countless free designs to fit almost any gadget.